Geotags:

AustraliaSwitzerland

OLED: At ETH Zurich, pixels take shape like microchips.

Photosensitive polymers combine light emission and lithographic precision, with prospects for microdisplays, sensors, and biomedical research.

OLED: Research at ETH Zurich, Switzerland, on luminous organic materials and microfabrication techniques, with prospects for miniaturized displays, sensors, and biomedical research tools
The composition juxtaposes semiconductor fabrication with a logo created with experimental OLEDs, illustrating research that integrates light emission and lithographic processing in the same material, without representing an already operational production line. (Illustration: Xiaoliangge/Adobe Stock and Shao-Wei Lo and collaborators/Nature, edited by ETH Zürich)

The material that emits light can also become the material that allows us to design its geometry.ETH in ZurichA research group has developed polymers capable of simultaneously functioning as light-emitting components and photosensitive resins, bringing OLED manufacturing closer to the precision techniques used for microchips. The novelty lies in the relationship between chemistry and manufacturing process: the molecules must retain their ability to emit light while undergoing the processing required to obtain very small structures.

- OLED, organic light-emitting diodes, use carbon-based compounds. To integrate them into miniaturized devices, it's necessary to precisely control where the material is deposited, what shapes to give it, and how to juxtapose elements of different colors. The team addressed this problem by directly designing the polymer structure, so that its reactive portion can participate in the processing without compromising the emissive core.

The research, conducted in Switzerland and led by Yinyin Bao, now professor at the University of Helsinki, together with the ETH professor Chih-Jen Shih, was published on September 16, 2026 on Nature with the title “Electroluminescent photoresists extending lithographic scaling to OLEDs.” The results include fluorescent structures and electrically powered devices, two distinct demonstrations that allow for evaluation of processing precision and luminous performance, respectively.

OLED: Research at ETH Zurich, Switzerland, on luminous organic materials and microfabrication techniques, with prospects for miniaturized displays, sensors, and biomedical research tools
The macaw occupies 300 by 430 micrometers and comprises 250 by 350 pixels, showing the precision of the multicolored structuring of the polymers, while magnification of the eye makes the fluorescent pattern visible, excited by external light and without individual electrical control (Photo: Shao-Wei Lo and collaborators/Nature)

Miniaturization meets a chemical obstacle

In augmented reality glasses and electronic camera viewfinders, the available screen space can be significantly reduced. Increasing the amount of information that can be displayed means placing more light elements on the same surface. Reducing the size, however, must be accompanied by the ability to produce regular structures, separate them correctly, and maintain their optical properties.

La photolithography It offers a method for defining minute geometries by exposing a photosensitive material to light. It is one of the processes that allows the semiconductor industry to fabricate complex circuits. Transferring the principle to emissive organic materials, however, presents a challenge: solvents and reagents used in the process can alter the molecules responsible for light.

Compatibility must therefore be built at the molecular level. A material may possess good light characteristics before processing but lose them during the definition of the structures. For the fabrication of a device, initial performance and process resistance must be considered together.

The study identifies a limitation in traditional techniques of evaporation under vacuum e inkjet printing compared to the size reduction achievable with lithographic processes for silicon electronics. The researchers' goal is to enable closer integration between luminous organic elements and circuits. CMOS, the complementary semiconductor technology that underpins much of modern electronics. Monolithic integration involves building these elements on the same substrate, rather than simply juxtaposing separately manufactured components.

OLED: In Zurich, Switzerland, new photosensitive polymers bring organic electronics closer to microchip processes, with potential applications in display and light technologies.
In star-shaped polymers, the luminous core is separated from peripheral UV-reactive groups, forming an insoluble network in the exposed regions, an architecture that allows for the definition of minute structures while protecting the emissive function during processing (Graph: adapted from Shao-Wei Lo and collaborators/Nature)

A star-shaped structure protects the emissive core

The solution takes the form of star polymers with multiple armsAt the center is the emissive component; around it develops an architecture that separates it from the chemical groups destined to react during processing. The principle is that of a structure core-shell, in which the different functions occupy different positions.

The ends of the arms contain the groups responsible for the cross-linkingWhen the material is exposed to ultraviolet radiation, these groups form links between molecules, creating a network. In the exposed areas, the material becomes insoluble: this difference allows a pattern to be defined and preserved in subsequent development stages.

The distance between the reactive periphery and the luminous center is crucial. Bond formation must occur where it is needed to stabilize the geometry, while the core must continue to perform its optical function. The innovation therefore consists in assigning the polymer two tasks and organizing them so that they can coexist.

Shih describes the principle with an essential formulation:

“We spatially separate the two functions,” explains Chih-Jen Shih, professor at ETH Zurich.

The protection of the emitter depends on the organization of the arms, which keep the reactive groups away from the center. Understanding this behavior has contributed to Andrew J. Christofferson, computational chemist of the RMIT University of Melbourne, through simulations of how the molecular structure can protect the light component.

The name given to the new class of materials, electroluminescent photoresists, expresses this dual function. The photoresist, or photosensitive resin, is normally used to define a pattern during processing. In this case, it also has the ability to emit light under electrical excitation and participates in the function of the final device.

The authors synthesized the polymers by atom-transfer radical polymerization, a technique that allows the growth of the chains to be controlled. The structure incorporates emitters thermally activated delayed fluorescence, a class of materials used to convert the energy of electronic excitations into light. The host shell and photosensitive surface groups complete the architecture designed for lithographic processing.

OLED: Research from ETH Zurich, Switzerland, is linking materials chemistry and electronics to develop small-scale light sources for future scientific devices and instruments.
The curves compare external quantum efficiency, current density, and luminance of experimental devices, distinguishing precursor polymers from crosslinkable photoresists: the latter show a maximum of 13,3 percent, while photographs, spectra, and a cross-section of the device accompany the electrically powered ETH logo, demonstrating multicolor emission that does not yet equate to independent pixel control. (Graph: Shao-Wei Lo and collaborators/Nature)

Microscopic parrot measures precision

One of the most immediate demonstrations is the image of a macaw parrot, made on a surface of 300 by 430 micrometers It's composed by 250 by 350 pixelsThe overall dimensions are less than half a millimeter per side. The multicolored subject allows us to observe how different emissive materials can be organized into a recognizable shape at a microscopic scale.

The image is fluorescent and staticThe light comes from excitation of the material by an external source. It is not a display capable of changing content and does not demonstrate electrical control of individual points. It is evidence of the precision with which the process can place and structure materials of different colors.

In a separate demonstration, performed with the electronics professor's group Hua Wang At ETH, researchers have produced a university logo 1 by 2,4 millimeters through electrically powered diodes. Here the result concerns electroluminescence, i.e., the production of light through the device's power supply. The two tests address complementary aspects of technological development.

The study also reports critical dimensions up to 110 nanometers in fluorescent structures obtained through lithographic processes. This value corresponds to 0,11 micrometers and describes the fineness of experimental details. It should not be interpreted as the pixel size of a fully functional electronic display. The geometric precision achieved in the material and the dimensions of a complete element, equipped with contacts and controls, are different quantities.

The authors have demonstrated the possibility of working the photoresists with both ultraviolet radiation either by means of electron beam lithographyThe latter uses an electron beam to define very fine structures. The availability of multiple processing modes expands the platform's experimental capabilities, without necessarily proving that all are suitable for the same production scale.

Another result concerns the sequential processing of multiple layersTo build multicolored devices, a step must leave the previously obtained structures sufficiently intact. The so-called process orthogonality refers to this compatibility between successive operations: it allows material to be added and its geometry to be defined without destroying the work already done. This is an essential condition when the device requires multiple, closely spaced emissive components.

Luminous efficiency is not enough for a screen

For multicolor diodes made by ultraviolet exposure, the research reports aexternal quantum efficiency greater than 13 percentThis indicator correlates the photons emitted by the device with the electrical charges introduced. It serves to evaluate the conversion of charges into light actually emitted; it is not equivalent to the overall energy efficiency of a screen and does not, in itself, describe image quality.

The measurement shows that the material retains its electroluminescent functionality after processing. This is a key aspect of the research: achieving a highly precise design would be of limited value if the process compromised its emission. However, the evaluation must also include the device's behavior over time, its response to operating conditions, and the ability to consistently repeat the manufacturing process.

Un microdisplay It also requires an architecture capable of controlling each light element. Turning on a predefined structure and displaying variable images are different operations. In the latter case, the circuit must determine which pixels to activate and at what intensity, updating the content according to the application's needs.

Individual control introduces its own constraints: electrical connections, separation between adjacent elements, signal management, and compatibility between the circuit and the organic layers. Reducing the size of the emitting material is therefore part of the problem. The overall design must ensure that light is emitted at the intended point and can be modulated without unwanted interference.

The contribution of the study to the research and development It involves introducing a chemical platform that can be processed with precision methods and features electrical emission. This result does not yet determine the industrial costs, production volumes, or performance of a commercial product. To evaluate its adoption, it will be necessary to link molecular behavior to the fabrication of the complete device.

Local sources are also of interest to biology

The prospects are not limited to visualization. A very small light source, placed directly on a chip, could become a component of instruments for microscopy and sensorsIn these applications, technological demands also include the position from which the light is emitted and the precision with which it reaches the sample.

Shih points to potential uses in biological and neuroscience research, including targeted illumination of single cells and light stimulation of nerve cells grown in the laboratory. They are proposed applications: the demonstrations presented do not constitute the validation of a medical instrument or an experimental system already ready for these uses.

For a device intended for biology, the properties to be verified would depend on the experiment: emitted color, intensity, spatial distribution, stability, and interaction with the observation system. A material suitable for a microscopic figure does not necessarily satisfy all the needs of an apparatus. The ability to precisely define its geometry, however, provides a useful design element.

The case relates chemistry, microfabrication, and electronics. The choice of molecule influences the processing; the processing determines the obtainable structures; the circuit determines how they are used. For companies and laboratories interested in optoelectronic integration, the potential value lies in the ability to design these functions together, rather than separately addressing incompatibilities after fabrication.

The program outlined by the researchers involves further reducing the size of the diodes. To achieve a functioning screen, the integration of theindependent pixel control electronics: the transition that would allow a network of light elements to display variable content.

Here are three insights that might interest you:

EU speeds up innovation: 380 million for photonic chips
Towards an artificial quantum neuron thanks to photons
“Swiss PIC” is born to support the Swiss photonics industry

OLED: Research at ETH Zurich, Switzerland, on luminous organic materials and microfabrication techniques, with prospects for miniaturized displays, sensors, and biomedical research tools
The 1-by-2,4-millimeter ETH logo demonstrates that electroluminescent photoresists retain the ability to emit light after lithographic processing, an achievement distinct from the realization of a full display, which still requires independent control of individual pixels. (Photo: Shao-Wei Lo and collaborators/Nature)

Location

COMMENTS

Leave a comment